A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
‹› When installing the brake lamp sensor, the plunger adjusts itself automatically.
‹› The brake pedal must remain in end position during installation and must not be moved.
‹› The brake pedal must be connected with the brake booster.
-
Insert brake lamp sensor in the mount on the brake pedal and press it in lightly.
‹› The brake lamp sensor must engage audibly with all three retaining tabs.
‹› The switch must not be rotated in the mount on the brake pedal.
‹› When installing the brake lamp sensor, the plunger adjusts itself automatically.
-
Rotate colored piece on the brake lamp sensor to the right as far as the stop to secure the switch.
-
Connect electrical connector to brake lamp sensor.
-
Install footwell vents - A- and -B -.