A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
Engine Speed Sensor: Service and Repair
Engine Speed Sensor
Removing
-
Disconnect connector on the engine speed sensor ( G28) - 2 - using assembly tool ( T10118).
‹› To release the connector without the assembly tool ( T10118), push the connector against the engine speed sensor and simultaneously lift up on the
release tab with a thin wire hook.
-
Remove engine speed sensor bolt - 1 -.
Installing
Installation is in reverse order of removal.
‹› Tightening Specifications. Refer to => [ Component Locations Overview ] See: Powertrain Management/Computers and Control
Systems/Locations.