A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
/Page-1627002.png)
-
Rotate thumb wheel - 1 - on the release tool (T40148) clockwise as far as the stop.
‹› The piston - 2 - is pulled upward and the release tabs - 1 - on the release tool (T40148) spread - arrows -.
-
Remove the 12V socket from the illumination ring with the socket illumination (L42) using the release tool (T40148).
-
Disconnect electrical connector.
Installing
Install in reverse order of removal, observing the following:
-
Remove support - 1 - on the release tool (T40148).
-
Slide piston down and hold it in place.
-
Rotate thumb wheel - 4 - on the release tool (T40148) counterclockwise - arrow -. This loosens the release tabs - 2 - on the 12V socket- 3 - so the
release tool (T40148) can be removed.
