A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
/Page-2023001.png)
Radius Arm: Service and Repair
Guide Link
Guide Link
Special tools, testers and auxiliary items required
‹› Engine-/transmission jack (V.A.G 1383 A )
‹› Ball joint puller (T40010 A)
Removing
-
Remove wheel.
-
Remove noise insulation.
-
Remove the bolts - arrows - and move the subframe shield - 1 - to the side, where applicable.
-
Remove the nut from the guide link joint pins enough so it is flush with the joint pin threads. Counterhold the joint pins if necessary.
To protect thread, screw nut on pin a few turns.
