A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
-
Remove the plastic insert - 1 - upward as illustrated.
Applies to all
-
Mark the installation position of the bonded rubber bushing or the hydraulic bonded rubber bushing on the subframe - arrows -.
The illustration shows a hydraulic bonded rubber bushing. On a conventional bonded rubber bushing, the recesses on the rubber shoulders are turned
90°.
-
If necessary, the support - arrow - with the small interior diameter must be removed from the (VAS 6178 ) and the Support (T10205/13) for that
installed.