A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
1. (T40184/3)
2. (VW 411)
3. (T40184/2). Pay attention to the installation position of the front rubber bonded bushing.
-
Place the tools on the front bonded rubber bushing and the wheel bearing housing - 3 - as illustrated.
‹› When mounting the wheel bearing housing onto the (T40184/1 ) be careful not to damage or push the rubber grommet on the rear rubber bonded
bushing.
-
Slowly press the front rubber bonded bushing in (not shown in the illustration) until the sleeve - 2 - can be pulled out at the top.
1. (VW 411)
2. (T40184/3)
3. Wheel Bearing Housing
4. (T40184/1). The side with the groove must face the wheel bearing housing. On a bonded rubber bushing with a "positioning tab", this is in the