A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
Overview
4
Clamp
‹› For securing the selector lever handle to the selector lever
‹› Removing and installing, refer to => [ Selector Lever Handle and Transmission Range Display Unit Assembly
Overview ] See: Lamps and Indicators - A/T/Shift Indicator/Service and Repair/Selector Lever Handle and Transmission Range Display Unit Assembly
Overview
5
Selector Lever Transmission Range (TR) Position Display (Y26)
‹› Refer to => [ Transmission Range Position Display ] See: Lamps and Indicators - A/T/Shift Indicator/Service and Repair/Transmission Range
Position Display
6
Nut
‹› 10 Nm
‹› Quantity: 4
‹› For securing shift mechanism to the body
7
Rubber seal
8
Selector Lever Sensor System Control Module ( J587) with Tiptronic Switch (F189)
‹› Refer to=> [ Selector Lever Sensor Control Module with Tiptronic Switch ] See: Relays and Modules - A/T/Shift Interlock Control
Module/Service and Repair
9
Selector mechanism function unit
‹› Can only be replaced as complete unit
‹› Refer to => [ Selector Mechanism Function Unit ] See: Selector Mechanism Function Unit
10
Shift lock solenoid (N110)
‹› Refer to => [ Shift Lock Solenoid ] See: Shift Lock Solenoid
11
Transmission Park Selector Switch (F305)
‹› Consists of two micro-switches on the circuit board on the shift lock solenoid (N110)
‹› Can only be replaced together with Shift Lock Solenoid (N110), refer to => [ Shift Lock Solenoid ] See: Shift Lock Solenoid
12
Noise Insulation
‹› Not installed on all vehicles.
13
Lock washers
‹› Quantity: 4
‹› Replace
‹› For securing the noise insulation on the selector mechanism function unit
14
Retaining clip
‹› Secures selector lever cable on selector mechanism function unit
15
O-ring
‹› Replace