A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
-
Bring assembly device into contact with joint by turning knurled thumb screws - 2 -.
‹› Joint must be secured without play in (T40018) or (T40084).
‹› Tighten the screws - 2 - by hand only.
-
Screw (VW 771) into (T40018) or (T40084).
Drive axle AAR 3300 i (T40018) is shown in illustration.
Use (T40084) with drive axle AAR 2600 i.
-
Pull joint out horizontally with impact tool.
Leave joint in (T40018) or (T40084).
-
Mark installation position of the parts - 1 - and - 2 - with lines.