A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
Wheel Bearing: Removal and Replacement
Wheel Bearing Unit
Refer to => [ Headlamps ]
Wheel Bearing Unit
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1331)
‹› Torque Wrench (V.A.G 1332)
‹› Torque Wrench (V.A.G 1576)
Removing
-
Remove drive axle. Refer to => [ Drive Axle ] See: Axle Shaft Assembly/Service and Repair/Removal and Replacement/Front Suspension/Drive
Axle.
-
Insert both of upper control arm joint pins - 2 - in the wheel bearing housing and insert the bolt - 1 -.
‹› This step is necessary to avoid damage to suspension components when loosening and tightening the cap screws.
-
Remove brake caliper and secure to body so that the weight of the brake caliper does not stress or damage brake hose or brake line.
-
Remove disc brake.
-
Remove the front wheel speed sensor.
-
Remove the cap screws - arrows -.