A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
/Page-1381002.png)
-
Remove wheel bearing unit.
CAUTION!
‹› Avoid contaminating with dirt and damaging the seal when setting down/storing.
The wheel bearing - 1 - must always face up.
-
Always set the wheel bearing down on the wheel hub - 2 -.
-
Service the wheel bearing unit. Refer to => [ Wheel Bearing Unit ] See: Overhaul/Front Suspension.
Installing
Installation is performed in the reverse order of removal. Observe the following when doing so:
Tightening specifications: Refer to => [ Wheel Bearing Housing and Wheel Bearing Unit Assembly Overview ] See: Wheel Bearing Housing and
Wheel Bearing Unit Assembly Overview.
