A4 Quattro Wagon L4-2.0L Turbo (CAEB) (2009)
Wheel Bearing: Removal and Replacement
Wheel Bearing Housing
Wheel Bearing Housing
Special tools, testers and auxiliary items required
‹› Torque Wrench (V.A.G 1332)
‹› Torque Wrench (V.A.G 1410)
Removing
-
Determine dimension - a - from the center of the wheel to the lower edge of the wheel housing before starting work while the vehicle is resting on
its wheels.
-
Place the vehicle on a hoist.
Loosen the connection between the drive axle and wheel hub. Refer to => [ Threaded Connection Between Drive Axle and Wheel Hub, Loosening and
Tightening ] See: Axle Shaft Assembly/Service and Repair/Removal and Replacement/Threaded Connection Between Drive Axle and Wheel Hub,
Loosening and Tightening.
-
Remove wheel.
-
Release the connector - 1 - from the rear speed sensor and remove it.
-
Disconnect the electro-mechanical parking brake connector - 3 -.