A4 Quattro Wagon V6-2.8L (AHA) (1998)
/Page-6694003.png)
8
-
Support
-
To remove, heat body with heat gun to approx. 40 degrees C (104 degrees F) and pull off support.
-
To attach, heat body in adhesion area with hot air injector to approx. 40 degrees C (104 degrees F).
-
Adhesion surface must be free of dust and grease
-
Pull off protective foil and press on support using special tool 3356 (application roller).
9
-
Combination bolt
-
23 Nm (17 ft.lb)
10
-
Console
