A4 Quattro Wagon V6-2.8L (AHA) (1998)
/Page-6777001.png)
Trunk / Liftgate Striker: Service and Repair
Tailgate Striker, Removing And Installing
-
Before removing striker, mark its position using soft pencil.
-
To remove, unscrew hex nuts - 2 - and remove striker - 1 -.
-
Position new striker according to markings and tighten hex nuts finger-tight.
-
Close tailgate until lock engages and tailgate is in flush position.
-
Open tailgate and tighten hex nuts to 8 Nm (71 in.lb).
-
Check for flushness and shutting comfort; adjust if necessary.
