A4 Quattro Wagon V6-2.8L (AHA) (1998)
Trim Panel: Service and Repair
Left and Right-Side Trim, Removing and Installing
Left And Right-side Trim, Removing And Installing
-
Remove side panel.
-
Remove tailgate seal in area of loading edge/side panels.
-
Remove loading edge.
-
Lift front edge of cover for seat belts and unclip.
-
Lift up cover for latch bracket for rear backrest.
-
Remove cap.
Disassembling tie-down.
-
Remove bolts (arrow).
Tightening torque: 1.5 Nm (13 in.lb)
-
Unclip side trim and pull up and over belt guide and latch bracket.
-
If changing completely, disassemble seat belt webbing underneath rear seat.
-
Installation is the reverse of removal.