A4 Quattro Wagon V6-2.8L (AHA) (1998)
Indicated on display
-
Press -Q- button to confirm input.
Indicated on display
-
The left-front bleeder screw should be open when actuating the hydraulic pump.
-
Press buttons -0-, -0- and -2- to input display group number 2 (002) and press -Q- button to confirm input.
The Electronic Stability Program (ESP) hydraulic pump -V156- is actuated for 10 seconds.
Indicated on display
-
Close bleeder screw.
-
Press button to advance through program sequence.
Indicated on display
-
The remaining installation procedures are the reverse of removal.