A4 Quattro Wagon V6-2.8L (AHA) (1998)
Fig. 6 Checking clutch gap
-
Using feeler gauge, check gap around entire circumference.
-
Must be: 0.3 to 0.6 mm (0.012 - 0.024 in.).
NOTE: Gap must be within tolerance around entire circumference.
Fig. 6 Checking clutch gap
-
Using feeler gauge, check gap around entire circumference.
-
Must be: 0.3 to 0.6 mm (0.012 - 0.024 in.).
NOTE: Gap must be within tolerance around entire circumference.