A4 Quattro Wagon V6-2.8L (AHA) (1998)
-
Color: blue
8
-
Lever
-
Color: blue
9
-
Lever
-
Color: red
10
-
Crank for temperature flap
-
Snaps into flap
-
Color: red
11
-
Screw
12
-
Central flap
13
-
Footwell/defrost - flap
14
-
Lever
-
Color: white
15
-
Temperature flap
Fig. 1 Evaporator line/housing seal
-
Evaporator lines -A- and -B- are sealed between the air distribution housing halves with foam gasket -C-. Check and replace as necessary.
Fig. 2 Evaporator seal
-
Circumference of evaporator -A- is sealed at air distribution housing with foam gasket -B-. Check and replace as necessary.
NOTE: Install gasket -B- to evaporator with gap in area -C- (to allow condensation drainage).