A4 Quattro Wagon V6-2.8L (AHA) (1998)
-
Check chamfer on protective plate (item 7).
-
After installing, check continuity between metal ring on fuel filler neck and chassis Ground point. Specified value: approx. 0 Ohms
7
-
Protective plate
-
For fuel filler neck
-
With Ground connection
-
Before threading in mounting screw (item 10) check for tight fit on screw eye of Ground connection
8
-
Sealing ring
-
Installed position: Sealing lip points to fuel filler neck
9
-
O-rings
-
Different sizes
-
Replace
10
-
Bleed valve
11
-
Bleed line
-
To EVAP canister
Fig. 1 Bleed valve removing, installing, checking
Requirement
-
Fuel tank removed.
-
To remove, unclip valve from side of filler neck.
-
Close off filler neck by hand -3-.
-
Blow into filler neck -1-
-
Button -2- pressed in direction of arrow: Flow
-
Button -2- in OFF direction: NO Flow.