A4 Quattro Wagon V6-2.8L (AHA) (1998)
-
To remove, unclip valve from side of filler-neck.
-
Lever in rest position: Valve closed
-
Lever pressed in direction of arrow: Valve open
Fig. 2 Ground connection, installed position
-
Route the Ground connection -Arrow-, as shown in image.
-
Ensure Ground connector fits tightly on filler-neck Ground clamp.
-
Before threading in screw -1-, ensure tight fit of screw eye -2- on fuel filler-neck protection plate Ground -3-.
CAUTION! After installation, check for continuity between Ground clamp on filler neck and chassis Ground.
-
Specification: approximately 0 ohms.
Fig. 3