A4 Quattro Wagon V6-2.8L (AHA) (1998)
Intake Air Temperature Sensor: Testing and Inspection
Intake Air Temperature (IAT) Sensor, Checking
Required special tools and test equipment
-
VAG1551 or VAG1552 Scan Tool (ST) with VAG1551/3 adapter cable
-
VAG1598/22 test box
-
Multimeter US1119 (Fluke 83 or equivalent)
-
VW1594 connector test kit
-
Wiring diagram
-
Chilling spray (commercially available)
Checking
-
Connect VAG1551 or VAG1552 scan tool and press buttons -0- and -1- to insert "Engine Electronics" address word 01 (with ignition switched
on). Refer to "Scan Tool Testing/Scan Tool Connecting and Initial Checks/Connecting VAG 1551/1552 Scan Tool" See: Powertrain
Management/Computers and Control Systems/Testing and Inspection
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -8- to select "Read Measuring Value Block" function 08, and press -Q- button to confirm input.
Indicated on display
Read Measuring Value Block
HELP
Input display group number XXX
-
Press buttons -0-, -0- and -4- to input display group number 4 (004), and press -Q- button to confirm input.
Indicated on display (1-4 = display fields)
Read Measuring Value Block 4
->
1 2 3 4
-
Compare displayed value with specified value for intake air temperature (display field 4):
Display Group 4
Evaluation of display group 4