A4 Quattro Wagon V6-2.8L (AHA) (1998)
-
Remove two Phillips head screws (arrows).
Tightening torque: 0.6 Nm (5.4 inch lbs.)
-
Remove upper trim panel -1- for steering column switches.
Note: When installing, the upper trim panel has to be inserted into the hooks of the lower trim panel, swiveled down and then screwed tight.
-
Remove screws -2- (2x).
Tightening torque: 0.6 Nm (5.4 inch lbs.)
-
Remove hex socket head screw -1-.
Tightening torque: 0.6 Nm (5.4 inch lbs.)
-
Remove lower steering column trim panel -3-.
-
Release steering angle sensor at catches (arrows).