A4 Quattro Wagon V6-2.8L (AHA) (1998)
/Page-5426002.png)
-
Disconnect the wires - 3 - and - 4 - from the starter.
-
Remove bolts - 1 - and - 2 - and remove starter.
‹› For the sake of illustration, the figure depicts engine support as removed.
Vehicles with automatic transmission:
-
Detach right driveshaft from transmission flange shaft.
-
Disconnect electrical wires - 2 - and - 3 - from starter.
-
Remove bolts - 1 - and - 4 - and remove starter.
‹› For the sake of illustration, the figure depicts engine support as removed.
Installing
Install in reverse order of removal, observing the following:
-
Screw right driveshaft onto flange shaft.
-
Connect battery. Required actions => .
Tightening Specifications
