A4 Quattro Wagon V6-2.8L (AHA) (1998)
-
move lever arm -C- with locating bolt -A- perpendicular to height adjuster -B-.
-
Tighten locking bolt -D-.
-
Relieve tension from compressed coil spring and remove VAG1752/1 spring compressor.
-
Remove locating bolt -A- from suspension strut mounting bracket.
-
Tighten nut (arrow).
Tightening torque: 70 Nm (52 ft. lbs.) + 1/4-turn (90°)
-
Remove suspension strut from VAG1752 suspension strut tensioner.
Note: Illustration shows right-hand suspension strut.