A4 Quattro Wagon V6-2.8L (AHA) (1998)
-
An extra ATF check must be performed for vehicles with auxiliary ATF cooler page 37-138
-
The ATF temperature is read out by the VA5G051 tester or VAG1551 Scan Tool (ST).
Checking ATF temperature
- Connect VAS5051 tester to vehicle with VAS5051/1 diagnostic wire. Alternately, VAG 1551 Scan Tool (ST) can also be attached using VAG
1551/3 adapter.
- Start engine.
When indicated on display:
- Press buttons -0- and -8- to select "Read measuring value block" and press -Q- button to confirm input.
When indicated on display:
- Press buttons -0-, -0- and -4- to select display group "004" and press -Q- button to confirm input.
When indicated on display:
- Read ATF temperature in display field 1.
Checking and correcting ATF level
Notes:
ATF level is checked at the ATF check plug.
ATF level is correct if a little bit of fluid still escapes at the ATF check plug between 35 and 45°C* (dependant on the fluid level when warming
up).
*For warm countries 50°C