A4 Quattro Wagon V6-2.8L (AHA) (1998)
Transmission Speed Sensor: Service and Repair
Transmission Input Speed Sensor -G182-, Replacing
Note:
Do not use a sensor which has dropped onto the ground (permanent magnet breaks).
Removing
-
Remove valve body.
-
Remove Transmission Input Speed Sensor -1 - at valve body.
Installing
-
Use two spacer sleeves -2- (height: 20 mm) to install Transmission Input Speed Sensor -1
Note:
The side of the sensor with the connector contacts faces toward the middle of the valve body.
-
Change ATF or top up after repairs.
Tightening torques