A4 Quattro Wagon V6-2.8L (AHA) (1998)
/Page-4374004.png)
-
Push handle -3- down fully so it engages in circular groove on selector lever.
-
Press button -2- into selector lever handle -3-.
-
Pull up sleeve -1- until it engages in handle -3-.
Removing and installing securing spring for lock cable
Removing
-
To remove lock cable, lift spring slightly at top (arrow -B-).
-
Disengage spring (arrow -A-) from retainer lug (arrow -C-) and lift out.
Installing
-
Insert spring from above (arrow -B-) and engage under retainer lug (arrow -C-).
-
Align spring so it lies level in groove (arrow -A-).
-
To install lock cable, lift spring slightly at top (arrow -B-).
