A4 Quattro Wagon V6-3.0L (AVK) (2002)
Rear Door Window Regulator: Service and Repair
Window Regulator and Door Window, Separating
Window Regulator And Door Window, Separating
1
-
Window frame
-
Removing:
-
Remove door trim.
-
Window frame removed together with window regulator from door.
-
Door window - 4 - removed.
-
To remove, unscrew countersunk screw - 7 - and remove window regulator from window frame.
-
Installation:
-
When installing, make sure that guide rail, arrow - A -, runs parallel to guide arrow - B -
-
Tighten bolts - 7 - to 6 Nm.
2
-
Triangular panel
-
Before removing, disassemble window frame and window regulator.
-
Unscrew bolt - 3 - and remove panel sideways.
3
-
Countersunk screw
-
5 Nm
4
-
Window
-
Removing:
-
Drive down door window fully.
-
Unscrew bolts - 5 - and remove door windows from window regulator.
-
Installation:
-
Insert window into window regulator.
-
Screw bolts - 5 - into window regulator, but do not tighten yet.
-
Drive door window upward into window frame.
-
Pull door window toward front into window guide on window frame at B-pillar and tighten bolts - 5 - to 4 Nm.