A4 Quattro Wagon V6-3.0L (AVK) (2002)
Subframe: Removal and Replacement
Front
Subframe, removing and installing
Special tools and equipment
^
10-222 A Support bar
^
10-222 A/1 Legs of support bar
^
3393 Testing mandrels
Removing
-
Support engine with support bar.
-
Remove wheel trim; pull trim cap off light-alloy wheels (puller in vehicle tool kit).
-
Remove wheels.
-
Secure brake disc with wheel bolt.
-
Remove noise insulation tray.
-
Before disconnecting subframe, use special tool 3393 to check whether holes -1- and -2- match. If they do not, you must perform wheel alignment
after the subframe is re-installed.
-
Loosen nuts -arrows- on transmission mount.