A4 Quattro Wagon V6-3.0L (AVK) (2002)
-
Installing:
NOTE: When installing a new molded headliner, clip frame for sunroof - 3 - to molded headliner.
-
Carefully slide molded headliner in through rear lid.
-
Attach wiring harness at molded headliner.
NOTE: Follow sequence when installing because otherwise the roof trim can no longer be centered.
-
Clip in rear molded headliner at clip - 1 -.
-
If installed, tighten bolt - 4 - to sunroof.
-
Clip in visor center bracket.
Further installation is performed in the reverse order of removal.
3
-
Frame
-
For sunroof
4
-
Screw
5
-
Sun visor center bearing
6
-
Cover cap
Disconnect electrical connectors
-
Unclip trim on mirror boot and disconnect electrical harness connector - arrow -.