A4 Quattro Wagon V6-3.0L (AVK) (2002)
Seat Heater: Service and Repair
Seat Heating Element, Removing and Installing
Seat Heating Element, Removing And Installing
Removing
-
Remove seat.
-
Remove seat pan.
-
Remove seat pan cover and upholstery.
-
Cut out area - A - with electrical connection wire from old heating element.
-
Pull out old electrical connection wire.
-
Disconnect electrical wire connections to heating elements at seat bolsters at positions - B -.
Installing
-
Align new heating element on seat surface, remove protective foil and glue new heating element to same positions as old heating elements.
-
Route connecting wires to seat bolsters through openings in seat cushion without crossing.
-
Guide electrical connection wire downward through designated opening in seat cushion.