A4 Quattro Wagon V6-3.0L (AVK) (2002)
/Page-571003.png)
^
Loosen bolts of guide frame in the sequence of the numbers and follow arrows.
^
Press off guide frame with Me bolts (arrows).
^
Carefully remove guide frame.
WARNING: Wear protective glasses.
^
Using rotating plastic brush, remove remaining sealant from cylinder head and guide frame.
^
Clean sealing surfaces so they are completely free of any oil or grease.
Installing
Note: Replace gaskets and O-rings.
^
Crankshaft aligned using T40026 locking pin.
^
Oil camshaft journal surface.
Left-side cylinder head:
^
Insert camshaft into cylinder head as depicted in illustration.
^
Cams at cylinder 5 point downward evenly (arrows).
