A4 Quattro Wagon V6-3.0L (AVK) (2002)
/Page-650002.png)
-
Remove bracket for ATF lines, to do so remove nuts -1- and -2-.
Note: Union nuts -3- of ATF lines must not be disconnected.
All
-
Unbolt bracket for refrigerant line at oil pan (arrows).
Note: Depicted in illustration for a vehicle with manual transmission.
-
Disconnect electrical harness connector at Oil level thermal sensor (arrow) and move wiring clear.
-
Place engine oil drip tray beneath engine, since oil will escape again.
