A4 Quattro Wagon V6-3.0L (AVK) (2002)
-
Insert bolt -1- in center hole of 2024A Engine sling and secure with a cotter pin.
-
Attach bolt for 2024A Engine sling at 10-222A Engine support bridge spindle.
-
Attach 2024A Engine sling to sling clamps at front and rear of engine.
WARNING: Take-up hooks and pins at engine sling must be secured using securing pins (arrows) as shown in illustration.
-
Slightly pre-tension engine using engine support bridge spindle.
-
Place engine oil drip tray beneath engine.
-
Drain engine oil.
-
Loosen oil filter (arrow) using tension strap; e.g. Hazet 2171-1.
-
Place VAG1306 Drip tray beneath engine.
-
Clamp coolant hoses -2- and -3- using 3094 hose clamps.
-
Disconnect coolant hoses from oil cooler -1-.
-
Remove oil cooler.