A4 Quattro Wagon V6-3.0L (AVK) (2002)
-
Tighten diagonally bolts -1- to 16 Nm and bolts -2- to 22 Nm.
-
Install oil pump.
-
Install oil pan (lower part).
-
Replace O-ring at guide tube for oil dipstick and insert guide tube into hole in oil pan (upper part).
-
Install starter:
-
Install generator.
-
Install subframe:
-
Install ribbed belt.
-
Install radiator support.
-
Add engine oil and check oil level.
-
See Caution for connecting Telematics battery Observe safety precautions after connecting the battery:
-
Top up with coolant.
Note:
^
Only reuse drained coolant if cylinder head or engine block were not replaced.
^
Dirty coolant cannot be reused.
Tightening torques