A4 Quattro Wagon V6-3.0L (AVK) (2002)
/Page-696004.png)
^
Install crankshaft toothed belt gear -2- with new diamond disc -3- and new central bolt -1-.
Note:
^
Contact surfaces between toothed belt gear, diamond disc and crankshaft must be free of oil.
^
Do not additionally oil bolt for toothed belt gear for crankshaft.
^
Remove oil pan (upper part), Refer to Oil Pan, Service and Repair.
^
After installing oil pump, remove drill bit from adjusting hole and thread in locking bolt with new sealing ring.
^
Install toothed belt (adjust timing), Refer to Timing Belt, Service and Repair
Tightening torques
