A4 Quattro Wagon V6-3.0L (AVK) (2002)
Air Register: Service and Repair
Defroster Intermediate Piece For Front Windshield
Defroster Vent Intermediate Piece For Front Windshield, Removing And Installing
Removing
-
Remove instrument panel:
-
Loosen brake pedal mounting bracket (and clutch pedal) from central tube.
-
Loosen hex nuts -A- for central tube left side and unscrew approx. 15 mm.
-
Remove hex nuts -B- for central tube on right side.
-
Remove connecting screws between central tube and the windshield cross member (in passenger compartment).
-
Remove connecting screws between central tube and the plenum chamber (between electronic box and windshield cross member in plenum
chamber).
-
Pull central tube carefully back, until it touches the hex nuts on the left side and still rests on the threaded bolt on the right side.
-
Loosen intermediate piece -A- from central tube -B-
-
Remove intermediate piece -A-.
Installing
NOTE:
-
When installing the instrument panel, make sure that the intermediate piece for defrost fits properly on the defrost vent and that it is not pinched.
-
After installing the instrument panel, check vent direction and air distribution of flowing air coming from the defrost vent to windshield.