A4 Quattro Wagon V6-3.0L (AVK) (2002)
/Page-2214003.png)
-
Press noise insulation mat aside until rear bolt -C- is accessible.
-
Remove bolts -C-.
-
Push noise insulation mat aside and pull Fresh Air Blower (V2) -D- out of air conditioner.
NOTE:
-
The Fresh Air Blower (V2) contains the Fresh Air Blower Control Module (J126) as an integral component which cannot be replaced separately.
-
When installing, pay attention to correct positioning of Fresh Air Blower V2 in air conditioner.
Installing
-
Install in reverse order.
