A4 Quattro Wagon V6-3.0L (AVK) (2002)
/Page-555003.png)
4. Pressure piece E-43
5. Special nut E-8-214 and tie bolt
Pressing in wheel hub
-
Install wheel hub -1- and hollow piston cylinder -2- to wheel bearing with tie bolt.
-
Install pressure piece -3.- from inside with collar facing special nut -4-.
-
Press in wheel hub by actuating pump.
1. Wheel hub
2. Hollow piston cylinder HKZ-15
3. Pressure piece E-5
4. Special nut E-8-214 and tie bolt
Perform remaining installation operations in reverse order from removal.