A4 Quattro Wagon V6-3.0L (AVK) (2002)
This function is used to adapt the offset value for the engine speed threshold to the dynamic oil pressure warning.
Indicated on display
Rapid data transfer
HELP
Select function XX
-
Press -1- and -0- and confirm by pressing the -Q- button.
Indicated on display
Rapid data transfer
Q
10-Adaptation
-
Press -Q- button to confirm input.
Indicated on display
Adaptation
Input channel number XX
-
Press buttons -3- and -0-.
-
Press -Q- button to confirm input.
Indicated on display: Adaptation value is displayed, for example 0.
Channel 35 Adaptation 0
->
<-1 3->
NOTE:
-
The adaptation value of 0 corresponds to the value set at the factory for the oil pressure warning if the oil pressure drops below 1.2 bar at 1500
rpm.
-
The adaptation can be performed in four steps (0-1000).
-
The adaptation value of "250" changes the engine speed threshold to 1750 rpm.
-
If the value "0" was changed due to a customer complaint, the changed value must be transferred when replacing instrument cluster.
-
Press -> button.
Indicated on display:
Channel 35 Adaptation 0
Input adaptation value XXXXX
-
Input adaptation value using keypad, filling initial positions with "O", for example, 00250.
Indicated on display:
Channel 35 Adaptation 0
Q
Input adaptation value 00250
-
Press -Q- button to confirm input.
Indicated on display:
Channel 35 Adaptation 250
Q
< -1 3- >
-
Press -Q- button to confirm input.
Indicated on display:
Channel 35 Adaptation 250
Q
Store changed value?