A4 Quattro Wagon V6-3.0L (AVK) (2002)
<-- Similar screen appears.
^
The previous data in the ECM is erased and the new data is being transferred to the module from the flash CD.
Note:
Approx. flash time is 17-19 minutes.
NOTE:
If, during the "Update - Programming"; a fault message is displayed:
-
Confirm that VAS 5051 or VAS 5052 diagnostic tool power supply is adequate and that ALL appliances with high electromagnetic radiation (i.e.
mobile phones) are switched OFF).
-
The "Update - Programming" (flashing) process must then be started from the beginning using the "Repeat" button (arrow). DO NOT use the
"Cancel" button.
Important!
On NO occasion should the "Cancel" button be selected.
Once "Update Programming" (flashing) is complete: