A4 Quattro Wagon V6-3.0L (AVK) (2002)
Shift Solenoid: Service and Repair
5 Spd. A/T 01V
Shift Lock Solenoid -N110-, removing and installing
Removing
-
Remove shift mechanism.
-
Disconnect electrical harness connector on Shift Lock Solenoid -N110-.
-
Release lugs and remove selector lever lock solenoid forward (arrows).
Installing
Installation is reverse of removal, noting the following:
-
Press selector lever lock solenoid into guide until it engages; actuating lever -2- of solenoid must engage in locking lever -1- on shift mechanism.
-
Install shift mechanism cover.