A4 Quattro Wagon V6-3.0L (AVK) (2002)
Seat Belt Height Adjuster: Service and Repair
Three-Point Seat Belt With Seat Belt Height Adjuster
Three-Point Seat Belt With Seat Belt Height Adjuster and Belt Tensioner, Removing and Installing
1
-
Seat belt height adjuster
Removing:
-
Remove upper B-pillar trim.
-
Remove shouldered nut -3- and bolt -2-.
-
Remove seat belt height adjuster -1- up and out of position -A-.
Installing:
-
Guide seat belt height adjuster switch -4- into height adjuster assembly -1-.
NOTE: Do not press switch -4- when installing.
Function check after installing trim:
-
Height adjuster must audibly engage into all five of the possible positions (even in the top position).
-
Switch must return by itself to upper position after being actuated.
2
-
Bolt
-
23 Nm (17 ft lb)
3
-
Shouldered-nut