A4 Quattro Wagon V6-3.0L (AVK) (2002)
Engine Speed Sensor: Testing and Inspection
Engine Speed (RPM) Signal, Checking
Engine Speed Signal, Checking
Vehicles with multitronic 01J:
NOTE: The engine speed signal is output at terminal 37 of the engine control module only in vehicles with multitronic 01J.
-
Connect test box VAG 1598/31 to wiring harness for engine control module; do not connect engine control module. See: Powertrain
Management/Computers and Control Systems/Testing and Inspection/Scan Tool Testing and Procedures/Scan Tool Testing/Scan Tool Connecting
and Initial Checks/Wiring and Component Testing Using VAG1598/31 Test Box
-
Check for open circuit and short to positive or Ground in following wiring connections:
-
Test box VAG1598/31 Socket - 37 (Instrument cluster terminal)
-
Repair any open/short circuit as necessary.
If no wiring malfunction is detected:
-
Check CAN bus. See: Powertrain Management/Computers and Control Systems/Information Bus/Testing and Inspection/Component Tests and
General Diagnostics