A4 Quattro Wagon V6-3.0L (AVK) (2002)
Power Steering Fluid: Testing and Inspection
Power steering fluid level, checking
-
With engine stopped, move front wheels to straight ahead position.
Cold fluid:
-
Unscrew cap.
-
Wipe over dipstick with a clean cloth.
-
Screw in cap hand-tight and unscrew again.
Note: Fluid level is only valid if cap is screwed in completely.
-
Check fluid level:
Fluid level must be around MIN mark (up to 2 mm above/below mark).
Warm fluid (to approximately 50°C):
-
Check fluid level:
Fluid level must be between MIN and MAX marks.
Note:
^
Fluid must be drawn off if level is above that stated.
^
Check hydraulic system for leaks if level is below that stated. It is not then sufficient to merely top off oil.
^
Hydraulic fluid drained off is not to be re-used.