audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Subframe, Removing and Installing|Page 7708 > < Subframe, Removing and Installing
Page 2
background image

-

Remove rear section of exhaust system.

-

Remove coil spring.

-

Unbolt shock absorber from hub carrier/wheel bearing housing -1-.

-

Remove parking brake cable from holder below trapezoidal link. To do so, unfasten bolts.

-

Unscrew brake caliper -arrows-. For this use Allen key extension T40027.

Note: 
^

Use binding wire to attach brake caliper to body.

^

Never leave brake caliper hanging from brake hose.

-

Remove speed sensor and cable guide.

-

In vehicles with headlight range control, disconnect connector of vehicle level control system sensor.

Subframe, Removing and Installing|Page 7708 > < Subframe, Removing and Installing