A4 Quattro Wagon V6-3.0L (AVK) (2002)
/Page-1310005.png)
-
Fill with ATF using VAG 1924 ATF tiller tool until ATF exits from the check hole.
-
Always replace seal (arrow) for ATF check plug.
-
Tighten ATF check plug to 80 Nm.
-
Switch off motor.
-
Select diagnostic function "06 - end output" in selection.
Display on VA55051:
-
Switch off ignition and disconnect diagnostic connector after this indication is displayed.
-
Install noise insulation.
ATF, changing or topping off after repairs
Special tools and equipment
