A4 Quattro Wagon V6-3.0L (AVK) (2002)
/Page-1457005.png)
-
Before installing clutch slave cylinder in transmission housing, boot area - a - must be coated with Lithium Grease (G 052 150 A2).
-
Lightly coat contact surface for plunger on clutch release lever with Copper Grease (Z 381 351 TE).
-
To connect line to clutch slave cylinder, securing clamps - A - must be pressed down to stop.
-
Insert line - B - in clutch slave cylinder until you hear it engage.
-
Pull on the pipe/hose line and make sure it is secure.
