A4 Quattro Wagon V6-3.2L (BKH) (2005)
/Page-4832001.png)
Trunk / Liftgate Hinge: Service and Repair
Rear Lid Hinge, Removing And Installing
Removing
-
Remove cover - 1 - for rear lid hinge and cable guide - 2 - from rear lid hinge - arrows -.
-
Remove outer roof frame trim - 1 -, for this purpose lift trim from retaining clips - 2 - after unclipping and guide tabs - arrows - around the hinge.
-
Remove D-pillar trim.
NOTE: To prevent damage to paint, support and secure rear lid.
-
Remove nuts - arrows -.
