A4 Quattro Wagon V6-3.2L (BKH) (2005)
Body Emblem: Service and Repair
Rear Lid Lettering (Avant)
Lettering on rear lid (Avant)
NOTE: Outer edges of rear lid and lines extending from lower rear lights are used as reference edges.
Installation:
-
Warm vehicle and type designation to room temperature.
-
Bonding surfaces must be dry and free from dust and grease.
-
Clean outer panel with mineral spirits, treat with silicone remover and rub dry.
-
Pull off backing paper and press on characters - 1 -, maintaining pressure for approx. 3 seconds.
Dimensional data for Front-Wheel Drive (FWD) vehicles
-
a = 95 mm
-
b = 33 mm
-
c = 38 mm
-
d = 28 mm
-
e = 95 mm
Dimensional data for All Wheel Drive (AWD) vehicles