A4 Quattro Wagon V6-3.2L (BKH) (2005)
/Page-4857004.png)
-
Remove bolts - 2 - and remove shock absorber.
-
Remove brake disc and splash plate.
Continued for all vehicles
-
Apply engine/transmission jack V.A.G 1383 A with universal transmission support V.A.G 1359/2 and a suitable wooden block to subframe/final
drive (illustration shows vehicle with front wheel drive).
-
Tighten belt around subframe or final drive.
CAUTION: Before LOOSENING subframe bolts, secure vehicle against tipping over (e.g. by placing a weight of approximately 50 kg in the
luggage compartment).
-
Remove subframe bolts - arrows -.
Front wheel drive vehicles
-
Place parking brake cable and brake caliper over transverse link.
-
Lower subframe carefully. Guide subframe to prevent it from slipping.
All wheel drive vehicles
-
Carefully lower subframe approximately 15 cm. Guide subframe to prevent it from slipping.
-
Push subframe to the left until right parking brake cable and brake caliper can be routed over transverse link.
Note:
^
Take care not to stretch brake hose.
-
Push subframe to the right until left parking brake cable and brake caliper can be routed over transverse link.
-
Lower subframe.
Installing
Note:
-
Replace bolts and self-locking nuts [] instructions in exploded views.
Installation of subframe in the body is performed in reverse sequence to removal.
